Alloys available, material, alloy, chemistry, composition
  Advanced Centrifugals Ltd  

Advanced Centrifugals Ltd
108 Hwy 18
P.O. Box 106
Cambridge, WI 53523

(608) 423-3203
Fax: (608) 423-4095
tubes@advancedcentrifugalsltd.com

  
Retorts | Furnace Rolls | Wet Roll Assemblies | High Temperature Rolls | Common Materials Used
Centrifugally Cast Tubes | Centrifugally Cast Rings | Radiant Tube Assemblies | Advanced Alloys
Alternative Energy Savings | Other Services | Why Advanced? | Request Forms | Site Map | Home

 

Common Materials Used

alloys High Alloy Steels alloys
 
Heat Resistant High Alloy Steels
ASTM Similar AISI Wrought Type ASTM CHEMICAL COMPOSITION (%) Typical Hardness (BHN)
Spec Grade Chromium Nickel Carbon Molybdenum (Max)
A297 HC 446 23-30 4.00 max 0.50 max 0.50 190
A297 HF 302B 18-23 8-12 0.20-0.40 0.50 165
A297 HH 309 24-28 11-14 0.20-0.50 0.50 150
A297 HK 310 24-28 18-22 0.20-0.60 0.50 170
A297 HL   28-32 18-22 0.20-0.60 0.50 192
A297 HN 311 19-23 23-27 0.20-0.50 0.50 160
A297 HP   24-28 33-37 0.35-0.75 0.50  
A297 HT 330 15-19 33-37 0.35-0.75 0.50 180
A297 HU   17-21 37-41 0.35-0.75 0.50 170
A297 HW   10-14 58-62 0.35-0.75 0.50 185
A297 HX   15-19 64-68 0.35-0.75 0.50 176
 
Corrosion Resistant Stainless Steels
ASTM Similar AISI Wrought Type
ASTM CHEMICAL COMPOSITION (%) MECHANICAL PROPERTIES
Typical Hardness (BHN)
Spec Grade Chromium Nickel Carbon Others
Tensile x 1000
MIN TYP
Yield x 1000
MIN TYP
Elongation
MIN TYP
A743 CA-15 410 11.5-14.0 1.0 max 0.15 max Mo 0.5 max 90 100 65 75 18 25 217
A743 CA-40 420 11.5-1.0 1.0 max 0.40 max Mo 0.5 max 100 110 60 70   18 240
A743 CB-30 431 18-21 2.0 max 0.30 max   65 95 30 60 8 15 195
A743 CF-3 304L 17-21 8-12 0.03 max   70 82 30 40 35 55 150
A743 CF-8 304 16-21 8-11 0.08 max   70 79 30 39 35 55 155
A743 CF-5M 316L 17-21 9-13 0.03 max Mo 2.0-3.0 70 85 30 45 35 50 155
A743 CF-8M 316 18-21 9-12 0.06 max Mo 2.0-3.0 70 82 30 42 30 50 155
A743 CF-8C 347 18-21 9-12 0.08 max Cb=8xC min 1.0 max 70 80 30 40 30 48 156
A743 CG-8M 317 18-21 9-13 0.08 max Mo 3.0-4.0 72 85 35 45 25 50 156
A743 CH-20 309 22-26 12-15 0.20 max   70 90 28 40 30 38 187
A743 CK-20 310 23-27 19-22 0.20 max   70 83 35 40 30 40 160
A743 CN-7M   19-22 27.5-30.5 0.07 max Mo 2.0-3.0
Cu 3.0-4.0		 65 70 28 32 35 55 140

 

  
Retorts | Furnace Rolls | Wet Roll Assemblies | High Temperature Rolls | Common Materials Used
Centrifugally Cast Tubes | Centrifugally Cast Rings | Radiant Tube Assemblies | Advanced Alloys
Alternative Energy Savings | Other Services | Why Advanced? | Request Forms | Site Map | Home
Copyright © 2004 Advanced Centrifugals Ltd.